LMX-1002G-SFP
10-Port Industrial Gigabit Managed Ethernet Switch, w/8*10/100/1000Tx + 2*100/1000 SFP Slots
Product WarrantySee details >
0%
Introduction
Antaira’s LMX-1002G-SFP is a 10-port industrial gigabit managed Ethernet switch that is embedded with eight gigabit Ethernet ports and two dual rate (100/1000) SFP slots for fiber connection. This series is a fully manageable industrial Ethernet switch pre-loaded with standard Layer 2 network management software. It supports Jumbo Frame and wide bandwidth for data transmission and has sufficient port counts for edge level connectivity solutions.
The LMX-1002G-SFP has a compact form factor design with an IP30 rating, DIN-rail mounting, and standard operating temperature support from -10°C to 70°C. It also provides high EFT and ESD protection for any industrial networking application within factory automation, ITS, power/utility, water wastewater, or any other outdoor or harsh environment.
Features
- Supports 8*10/100/1000Tx Fast Ethernet Ports and 2*100/1000 SFP Slots
- Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
- Configuration: Web Console, Telnet, CLI Command
- Supports IGMP v1/v2/v3, up to 1024 Groups
- Supports QoS (IEEE802.1p) and CoS/ToS
- Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3
- System Warning Setting for Automatic Warning through E-Mail
- Redundant Power Input Design – 12~48VDC
- Housing: Metal IP 30 Rated; DIN-Rail and Wall Mount Support
- Standard Operating Temperature: -10~70C
- 5-Year Warranty
Package Content
- 1– LMX-1002G-SFP
- 1-RJ45 to DB9 Serial Console cable
- 2-Wall mounting brackets and screws
- 1-DC cable –18 AWG & DC jack 5.5x2.1mm
Download
Optional Accessories
-
- CBF-LC01LC-MD
- LC To LC 1 Meter Multi-Mode Duplex
-
- PA-60-48-US
- Power Adapter for LNP & IMP Series. Input 100-240VAC/1.4A, Output 48VDC/1.25A (US Plug)
-
- SFP-M-T
- 1 Gigabit Fiber SFP Transceiver, Multi Mode 550M / LC / 850nm, -40º~85ºC
-
- SFP-S10-T
- 1 Gigabit Fiber SFP Transceiver, Single-Mode 10km / LC / 1310nm, -40º~85ºC
-
- SFP-WA10-T
- 1 Gigabit Fiber SFP Transceiver WDM-A, SM/LC/10km/11.0dB/TX:1310nm RX:1550nm, -40º~85ºC
-
- SFP-WB10-T
- 1 Gigabit Fiber SFP Transceiver WDM-B, SM/LC/10km/11.0dB/TX:1550nm RX:1310nm, -40º~85ºC
-
- CBF-LC01LC-SD
- LC To LC 1 Meter Single-Mode Duplex
-
- DIN-RAIL-10
- 35mm Steel DIN-Rail Track - 10 Inches Long
-
- NDR-120-48
- 120W Single Output Industrial Din-Rail Power Supply, 48VDC Output
Related Resources
PoE, PoE+ and PoE++: Choosing the Right Industrial Ethernet Switch for You
PoE, PoE+ and PoE++: Choosing the Right Industrial Ethernet Switch for You
May 16, 2022
Advanced Industrial Managed Ethernet Switches
Advanced Industrial Managed Ethernet Switches
October 18, 2018
Technology
IEEE Standards
- IEEE 802.3 10Base-T Ethernet
- IEEE 802.3u 100Base-TX Fast Ethernet
- IEEE 802.3ab 1000Base-T Gigabit Ethernet
- IEEE 802.3z 1000Base-X Gigabit Fiber
- IEEE 802.3x Flow Control
- IEEE 802.1d STP (Spanning Tree Protocol)
- IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
- IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
- ITU-TG.8032 / Y.1344 ERPS (Ethernet Ring Protection Switch)
- IEEE 802.1Q Virtual LANs (VLAN)
- IEEE 802.1x Network Authentication
- IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization
Processing Type
Store and Forward
Protocol
IGMP v1/v2/v3, SNMP v1/v2c/v3, TFTP, SNTP, SMTP, RMON, HTTP, HTTPS, Telnet, Syslog, DHCP Option 66/67/82, SSH/SSL, Modbus/TCP, LLDP, IPv4/IPv6
Flow Control
IEEE 802.3x flow control, back pressure flow control
Software
Configuration
- Web Console,
- Telnet,
- CLI
VLAN Group
1~4094 groups
IGMP Group
1024 groups
Ethernet Redundancy
STP/RSTP/MSTP, port trunk with LACP, ERPS v1/v2(<50ms)
Performance
MAC Table Size
8K
Jumbo Frame
9.6 Kbytes
Memory Buffer
4 Mbits
Transfer Rate
- 14,880pps for Ethernet Port
- 148,800pps for Fast Ethernet Port
- 1,488,000pps for Gigabit Ethernet Port
Switching Architecture
Back-Plane (Switching Fabric): 20Gbps
Ethernet Interface
Ethernet Port Count
8 ports
10/100/1000 BASE-T(X)
8 ports
Fiber Interface
Fiber Port Count
2 ports
100/1000 BASE-(F)X SFP
2 ports
Wavelength
Refers to SFP module
Mechanical Characteristics
Housing
Metal, IP30 protection
Mounting
DIN-Rail mount, Wall mount (Optional)
Dimensions (W × H × D)
54 × 142 × 99 mm
Weight
- Unit weight : 2.2 lbs
- Shipping weight : 3.0 lbs
Power Requirements
Power Connection
Removable 6-contact terminal block
Input Voltage
12V–48V DC, Redundant Input
Power Redundancy
Yes
System Power Consumption
15 Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present
Environmental Limits
Operating Temperature
-10° to 70° C (14° to 158° F)
Storage Temperature
-40° to 85° C (-40° to 185° F)
Ambient Relative Humidity
5% to 95% non-condensing
Regulatory Approvals
Certifications
FCC, CE
UL 60950-1
✔
UL 61010-1 / UL 61010-2-201
✔
ISA 12.12.01 (UL C1D2)
✔
ATEX
✔
NEMA TS2
✔
EMI
- FCC Part 15 Subpart B Class A
- CE EN 55032 Class A
- EN 61000-6-4 Class A
EMS
- CE EN 55024
- EN 61000-6-2
- IEC61000-4-2 (ESD)
- IEC61000-4-3 (RS)
- IEC61000-4-4 (EFT)
- IEC61000-4-5 (Surge)
- IEC61000-4-6 (CS)
- IEC61000-4-8 (Magnetic Field)
Stability Testing
- Free Fall: IEC60068-2-32
- Shock: IEC60068-2-27
- Vibration: IEC60068-2-6
Green
RoHS Compliant
Warranty
5 years
Download
Datasheet
Models
-
- LMX-1002G-SFP
- 10-Port Industrial Gigabit Managed Ethernet Switch, w/8*10/100/1000Tx + 2*100/1000 SFP Slots
