5-Port Industrial PoE+ Managed Ethernet Switch w/4*10/100Tx (30W/Port), and 1*100Fx, Single-Mode 30 km, with SC Connector. (Hardware Version 2)

Antaira’s LMP-0501 is a 5-port industrial PoE+ managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, and 1*100Fx (SC or ST connector) fiber port with optional versions for multi-mode (2Km) and single-mode (30Km).

LMP-0501 is a fully manageable industrial Ethernet switch pre-loaded with standard Layer 2 network management software, and supports a user friendly web console interface for easy configuration. This product is IP30 rated, DIN-rail mountable, and has two wide operating temperature models for either a standard temperature range ( STD: -10°C to 70°C) or an extended temperature range (EOT: -40°C to 75°C). It also provides high EFT and ESD protection for any industrial networking application within factory automation, ITS, power/utility, water wastewater, and any other outdoor or harsh environment.

  • Supports 4*10/100Tx IEEE 802.3at/af Compliant with 30W/Port, and 1*100Fx (SC) Fiber Port
  • Fiber Supports: Single-Mode in 30Km
  • Network Redundancy Support: RSTP/MSTP, and TG.8032 ERPS (Recovery Time <50ms)
  • Configuration: Web Console, Telnet, CLI Command
  • Supports IGMP v1/v2, up to 256 Groups
  • Supports QoS (IEEE802.1p) and CoS/ToS
  • Supports IEEE802.1Q VLAN, SNMP v1/v2c
  • PoE Ping Alarm Function for PoE Ports Power Recycle
  • System Warning Setting for Automatic Warning through E-Mail
  • Redundant Power Input Design – 48~55VDC
  • Housing: Metal IP30 Rated; DIN-Rail and Wall Mount Support
  • Operating Temperature - STD: -10~70C
  • 5-Year Warranty
IEEE Standards IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af/at Power over Ethernet
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
ITU-TG.8032 / Y.1344 ERPS (Ethernet Ring Protection Switch)
IEEE 802.1Q Virtual LANs (VLAN)
IEEE 802.1x Network Authentication
IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization
IEEE 802.1ad Stacked VLAN Q-in-Q
Processing Type Store and Forward
Protocol CSMA/CD, IGMPv1/v2, SNMPv1/v2, TFTP, SNTP, SMTP, RARP, Syslog
Flow Control IEEE 802.3x flow control, back pressure flow control
Ethernet Interface
Ethernet Port Count 4 ports
10/100 BASE-T(X) 4 ports
PoE Port 4 ports (30W/port)
PoE Pin Assignment V+, V+, V-, V-, for pin 1, 2, 3, 6 (End-span, Mode A)
Fiber Interface
Fiber Port Count 1 port
100 BASE-FX Fiber 1 × 100Fx SC connector
Other Interface
LED Indicator Power 1, Power 2, Fault, Master, Ring: On / Off
Fiber Port: Link / Act
Ethernet Port: Link / Act
PoE: On-connected to PD devices
MAC Table Size 8K
Jumbo Frame 9.6 Kbytes
Memory Buffer 4 Mbits
Transfer Rate 14,880pps for Ethernet Port
148,800pps for Fast Ethernet Port
Switching Architecture Back-Plane (Switching Fabric): 1Gbps
Configuration Web Console, Telnet, CLI Command
VLAN Group 4095
IGMP Group 1024
Ethernet Redundancy STP/RSTP/MSTP, port trunk with LACP, ERPS v1/v2(<50ms)
Power Requirements
Power Connection Removable 6-contact terminal block
Input Voltage 48V–55V DC, Redundant Input
Power Redundancy Yes
Relay Output 24V DC, 1A resistive
System Power Consumption 7.5 Watts
Max. PoE Power Budget 120 Watts
Overload Current Protection Present
Reverse Polarity Protection Present
Environmental Limits
Operating Temperature -10° to 70° C (14° to 158° F)
Storage Temperature -40° to 85° C (-40° to 185° F)
Ambient Relative Humidity 5% to 95% non-condensing
Mechanical Characteristics
Housing Metal, IP30 protection
Mounting DIN-Rail mount, Wall mount (Optional)
Dimensions (W × H × D) 54 × 142 × 99 mm
Weight Unit weight : 1.9 lbs
Shipping weight : 2.7 lbs
Regulatory Approvals
Certifications FCC, CE
UL 508
EMI FCC Part 15 Subpart B Class A
CE EN 55032 Class A
EN 61000-6-4 Class A
EMS CE EN 55024 Class A
EN 61000-6-2 Class A
IEC61000-4-2 (ESD)
IEC61000-4-3 (RS)
IEC61000-4-4 (EFT)
IEC61000-4-5 (Surge)
IEC61000-4-6 (CS)
IEC61000-4-8 (Magnetic Field)
Stability Testing Free Fall: IEC60068-2-32
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
MTBF 525,679 hrs.
Green RoHS Compliant
Warranty 5 years
  • LMP-0501-S3
  • DC cable –18 AWG to DC Jack 5.5x2.1mm
  • Din Rail & Wall Mounting Kits
  • RJ45 to DB9 Serial Console Cable
Din-Rail to 19" Rack Mount Adapter for all Din-Rail Mountable Products, 2U Height
Power Adapter for LNP & IMP Series. Input 100-240VAC/1.4A, Output 48VDC/1.25A (US Plug)
This website uses cookies to enhance your browsing experience.