LMP-0602-S3-V2
6-port Industrial PoE+ Managed Ethernet Switch, with 4*10/100Tx (30W/Port), and 2*100Fx, Single-Mode 30 km. (Hardware Version 2)
Product WarrantySee details >
0%
Introduction
Antaira’s LMP-0602 is a 6-port industrial PoE+ managed Ethernet switch that is embedded with 4*10/100Tx Ethernet ports that support IEEE802.3at/af for a maximum of 30 watts per port, and 2*100Fx (SC or ST connector) fiber ports with optional versions for multi-mode (2Km) and single-mode (30Km).
The LMP-0602 is a fully manageable industrial Ethernet switch that supports the standard Layer 2 Ethernet configurable settings with a pre-loaded web console. This product is IP30 rated and DIN-rail mountable and provides operating temperature range models in STD: -10°C to 70°C, and EOT: -40°C to 75°C. It also provides a high EFT and ESD protection for any industrial networking application in factory automation, ITS, power/utility, water/wastewater treatment plants, or any outdoor or harsh environment.
Features
- Supports 4*10/100Tx IEEE 802.3af/at Compliant with
- 30W/Port and 2*100Fx Fiber Ports
- Fiber Supports: Single-Mode
- Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
- Configuration: Web Console, Serial, CLI Command
- Supports IGMP v1/v2/v3, up to 1024 Groups
- Supports QoS (IEEE802.1p) and CoS/ToS
- Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3
- Redundant Power Input Design: 48~55VDC
- Reverse Polarity Protection
- IP30 Protection
- DIN-Rail or Wall Mountable
- Operating Temperature Range : -10°C to 70°C
- 5-Year Warranty
Package Content
- 1*LMP-0602-S3
- 2*Wall Mount Brackets with screws
- 1*DC cable –18 AWG & DC jack 5.5x2.1mm
- 1*RJ45 to DB9 Serial Console cable
Optional Accessories
-
- DIN-RACK-2U
- Din-Rail to 19" Rack Mount Adapter for all Din-Rail Mountable Products, 2U Height
-
- MDR-60-48
- 60 Watt Series / 48 VDC / 1.25 Amps Industrial Slim Single Output DIN Rail Power Supply
-
- PA-60-48-US
- Power Adapter for LNP & IMP Series. Input 100-240VAC/1.4A, Output 48VDC/1.25A (US Plug)
-
- AD-SCM-STF-M
- SC Male To ST Female Adapter Multi-Mode
Related Resources
PoE, PoE+ and PoE++: Choosing the Right Industrial Ethernet Switch for You
PoE, PoE+ and PoE++: Choosing the Right Industrial Ethernet Switch for You
May 16, 2022
Persistent PoE Power for Uninterrupted Operation with Antaira Managed bt PoE Switches
Persistent PoE Power for Uninterrupted Operation with Antaira Managed bt PoE Switches
July 19, 2021
Simplifying Network for Onboard Surveillance and Bus Operation
Simplifying Network for Onboard Surveillance and Bus Operation
June 01, 2022
Industrial Power over Ethernet Product Brochure
Industrial Power over Ethernet Product Brochure
May 04, 2022
Technology
IEEE Standards
- IEEE 802.3 10Base-T Ethernet
- IEEE 802.3u 100Base-TX Fast Ethernet
- IEEE 802.3x Flow Control
- IEEE 802.3af/at Power over Ethernet
- IEEE 802.1d STP (Spanning Tree Protocol)
- IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
- IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
- ITU-TG.8032 / Y.1344 ERPS (Ethernet Ring Protection Switch)
- IEEE 802.1Q Virtual LANs (VLAN)
- IEEE 802.1x Network Authentication
- IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization
- IEEE 802.1ad Stacked VLAN Q-in-Q
Processing Type
Store and Forward
Protocol
IGMP v1/v2/v3, SNMP v1/v2c/v3, TFTP, SNTP, SMTP, RMON, HTTP, HTTPS, Telnet, Syslog, DHCP Option 66/67/82, SSH/SSL, Modbus/TCP, LLDP, IPv4/IPv6
Flow Control
IEEE 802.3x flow control, back pressure flow control
Software
Configuration
Web Console, Telnet, CLI Command
VLAN Group
4095
IGMP Group
1024 groups
Ethernet Redundancy
STP/RSTP/MSTP, port trunk with LACP, ERPS v1/v2(<50ms)
Performance
MAC Table Size
8K
Jumbo Frame
9.6 Kbytes
Memory Buffer
4 Mbits
Transfer Rate
- 14,880pps for Ethernet Port
- 148,800pps for Fast Ethernet Port
Switching Architecture
Back-Plane (Switching Fabric): 1.2Gbps
Ethernet Interface
Ethernet Port Count
4 ports
10/100 BASE-T(X)
4 ports
PoE Port
4 ports (30W/port)
PoE Pin Assignment
V+, V+, V-, V-, for pin 1, 2, 3, 6 (End-span, Mode A)
Fiber Interface
Fiber Port Count
2 ports
100 BASE-FX Fiber
2 × 100Fx SC connectors
Other Interface
LED Indicator
- Power 1, Power 2, Fault, Master, Ring: On / Off
- Fiber Port: Link / Act
- Ethernet Port: Link / Act
- PoE: On-connected to PD devices
Mechanical Characteristics
Housing
Metal, IP30 protection
Mounting
DIN-Rail mount, Wall mount (Optional)
Dimensions (W × H × D)
54 × 142 × 99 mm
Weight
- Unit weight : 1.9 lbs
- Shipping weight : 2.7 lbs
Power Requirements
Power Connection
Removable 6-contact terminal block
Input Voltage
48V–55V DC, Redundant Input
Power Redundancy
Yes
Relay Output
24V DC, 1A resistive
System Power Consumption
7.5 Watts
Max. PoE Power Budget
120 Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present
Environmental Limits
Operating Temperature
-10° to 70° C (14° to 158° F)
Storage Temperature
-40° to 85° C (-40° to 185° F)
Ambient Relative Humidity
5% to 95% non-condensing
Regulatory Approvals
Certifications
FCC, CE
UL 508
✔
UL 61010-1 / UL 61010-2-201
✔
EMI
- FCC Part 15 Subpart B Class A,
- CE EN55032 Class A
- EN61000-6-4 Class A
EMS
- CE EN55035/EN 61000-6-2
- IEC61000-4-2 (ESD)
- IEC61000-4-3 (RS)
- IEC61000-4-4 (EFT)
- IEC61000-4-5 (Surge)
- IEC61000-4-6 (CS)
- IEC61000-4-8 (Magnetic Field)
Stability Testing
- Free Fall: IEC60068-2-32
- Shock: IEC60068-2-27
- Vibration: IEC60068-2-6
MTBF
525,227 hrs.
Green
RoHS Compliant
Warranty
5 years
Download
Datasheet
Models
-
- LMP-0602-S3-T-V2
- 6-Port Industrial PoE+ Managed Ethernet Switch, with 4*10/100Tx (30W/Port), and 2*100Fx SC Connector., Single-Mode 30 km. EOT: -40° ~ 75°C. (Hardware Version 2)
