Bluetooth to RS-232 Converter, Bluetooth 2.0 Class 1, DC Power Adapter & 2dBi Antenna Included

Antaira Technologies BTS-1000A Bluetooth to RS-232 Serial Converter allows any device with an RS-232 port to communicate wirelessly with ease. No software installation is needed and no change in your existing system is required. The BTS-1000A can be used in any application that uses an RS-232 cable. Moreover, the BTS-1000A can also communicate with other Bluetooth Devices such as USB Dongles or bluetooth equipped computers or laptops. This class 1 bluetooth converter is a cost efficient cable replacement in any application.

  • Full Bluetooth 2.0 Support + EDR
  • No External Software Needed
  • Easy to Configure
  • Supports Max Baud rate of 115.2 K bps, Min 1200 bps
  • Plug-In-Design, 5 V DC External Power Supply
  • 300 ft. ( Enhance Antenna ) CLASS 1
Flow Control DTR/DSR
Data Bits 8
Stop Bits 1,2
Baud Rate 1200 bps ~ 115.2K bps
Serial Signals RS-232: TxD, RxD, CTS, RTS, DCD, RI, GND
Serial Interface
Serial Interface RS-232
Transfer Rate Max Baud rate of 115.2 K bps, Min 1200 bps
Power Requirements
Power Connection DC Jack
Input Voltage 5V DC / 200mA, Power over Pin-9
System Power Consumption Current Consumption 80mA
Environmental Limits
Operating Temperature 0° to 60° C (32° to 140° F)
Storage Temperature -15° to 70° C (-5° to 158° F)
Ambient Relative Humidity 5% to 95% non-condensing
Mechanical Characteristics
Dimensions (W × H × D) 65 × 12 × 30mm (2.56 × 0.47 × 1.18 inches)
Weight 0.08 lb (38 g)
Regulatory Approvals
Warranty 5 years
  • BTS-1000A
  • CD Software/Manual
  • Quick Installation Guide
  • External Antenna
  • Power Adapter
This website uses cookies to enhance your browsing experience.