LMP-1802G-SFP-T
18-Port IndustriaL PoE+ Managed Ethernet Switch, w/16*10/100/1000Tx (30W/port) + 2*100/1000 SFP ports; 48~55V DC Power Input; EOT: -40°~75°C
Product WarrantySee details >
0%
Introduction
Antaira’s LMP-1802G-SFP-T is a 18-port industrial Gigabit PoE+ managed Ethernet switch embedded with 16*10/100/1000Tx Ethernet ports that support IEEE 802.3at/af for a maximum of 30W/port and 2*100/1000 SFP portss. It is a fully manageable Layer 2+ Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as, IGMP, VLAN, QoS, SNMP, RMON, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks.
The LMP-1802G-SFP-T is IP30 rated, DIN-rail mountable, and supports a operating temperature support from -40° to 75°C. It also provides high EFT and ESD protection for industrial networking applications, such as, power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance, ITS, or any other outdoor or harsh environment.
Features
- Supports 16*10/100/1000Tx IEEE 802.3at/af Compliant with 30W/Port
- 2*100/1000 SFP ports
- Network Broadcast Storm Protection
- Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery time <50ms)
- Configuration: Web Console, Serial, CLI Command
- Supports IGMP v1/v2/v3
- Supports QoS (IEEE 802.1p) and CoS/ToS
- Supports IEEE 802.1Q VLAN, SNMP v1/v2c/v3
- Redundant Power Input Design 48~55VDC + Built-in Relay Output for Port Break Alarm
- DIN-Rail and Wall Mount Support
- Operating Temperature Range - EOT: -40° to 75°C
- 5-Year Warranty
Package Content
- DC Cable - 18 AWG & DC Jack 5.5 X 2.1 mm
- RJ45 to DB9 Serial Console Cables
- LMP-1802G-SFP-T
- Quick Installation Guide
- RJ45 dust cover set
- Wall mounting bracket set with screws
Related Resources
PoE, PoE+ and PoE++: Choosing the Right Industrial Ethernet Switch for You
PoE, PoE+ and PoE++: Choosing the Right Industrial Ethernet Switch for You
May 16, 2022
Persistent PoE Power for Uninterrupted Operation with Antaira Managed bt PoE Switches
Persistent PoE Power for Uninterrupted Operation with Antaira Managed bt PoE Switches
July 19, 2021
Simplifying Network for Onboard Surveillance and Bus Operation
Simplifying Network for Onboard Surveillance and Bus Operation
June 01, 2022
Industrial Power over Ethernet Product Brochure
Industrial Power over Ethernet Product Brochure
May 04, 2022
Technology
IEEE Standards
- IEEE 802.3 10Base-T Ethernet
- IEEE 802.3u 100Base-TX Fast Ethernet
- IEEE 802.3ab 1000Base-T Gigabit Ethernet
- IEEE 802.3z 1000Base-X Gigabit Fiber
- IEEE 802.3x Flow Control
- IEEE 802.3af/at Power over Ethernet
- IEEE 802.3ad for Port Trunk with LACP
- IEEE 802.1d STP (Spanning Tree Protocol)
- IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
- IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
- ITU-TG.8032 / Y.1344 ERPS (Ethernet Ring Protection Switch)
- IEEE 802.1Q Virtual LANs (VLAN)
- IEEE 802.1x Network Authentication
- IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization
Processing Type
Store and Forward
Protocol
IGMP v1/v2/v3, SNMP v1/v2c/v3, TFTP, SNTP, SMTP, RMON, HTTP, HTTPS, Telnet, Syslog, DHCP Option 66/67/82, SSH/SSL, Modbus/TCP, LLDP, IPv4/IPv6
Flow Control
IEEE 802.3x flow control, back pressure flow control
Software
Configuration
- Web Console,
- Telnet,
- CLI
VLAN Group
1~4094 groups
IGMP Group
1024 groups
Ethernet Redundancy
STP/RSTP/MSTP, port trunk with LACP, ERPS v1/v2(<50ms)
Performance
MAC Table Size
8K
Jumbo Frame
9.6 Kbytes
Memory Buffer
4 Mbits
Transfer Rate
- 14,880pps for Ethernet Port
- 148,800pps for Fast Ethernet Port
- 1,488,000pps for Gigabit Ethernet Port
Switching Architecture
Back-Plane (Switching Fabric): 36Gbps
Ethernet Interface
Ethernet Port Count
16 ports
10/100/1000 BASE-T(X)
16 ports
PoE Port
16 ports (30W/port)
PoE Pin Assignment
V+, V+, V-, V-, for pin 1, 2, 3, 6 (End-span, Mode A)
10G/5G/1GBase-T
16 ports
Fiber Interface
Fiber Port Count
2 ports
100/1000 BASE-(F)X SFP
2 ports
Wavelength
Refers to SFP module
Other Interface
LED Indicator
- Power 1, Power 2, Status, Master, Ring: On / Off
- Fiber Port: Link / Act
- Ethernet Port: Link / Act
- PoE: On-connected to PD devices
Mechanical Characteristics
Housing
Metal, IP30 protection
Mounting
DIN-Rail mount, Wall mount (Optional)
Dimensions (W × H × D)
67 × 142 × 99 mm
Weight
- Unit: 2.65 Ibs
- Shipping: 3.09 Ibs
Power Requirements
Power Connection
One removable 4-contact and One 2-contact terminal block
Input Voltage
48V–55V DC, Redundant Input
Power Redundancy
Yes
Relay Output
24V DC, 1A resistive
System Power Consumption
15 Watts
Max. PoE Power Budget
240 Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present
Environmental Limits
Operating Temperature
-40° to 75° C (-40° to 167° F)
Storage Temperature
-40° to 85° C (-40° to 185° F)
Ambient Relative Humidity
5% to 95% non-condensing
Regulatory Approvals
Certifications
FCC, CE
IEC61850-3
✔
UL 61010-1 / UL 61010-2-201
✔
NEMA TS2
✔
EMI
FCC Class A
EMS
- EN61000-4-2,3,4,5,6,8
- EN61000-6-2,4
Stability Testing
- Free Fall: IEC60068-2-32
- Shock: IEC60068-2-27
- Vibration: IEC60068-2-6
Green
RoHs Compliant
Warranty
5 years
Download
Datasheet
Models
-
- LMP-1802G-SFP
- 18-Port IndustriaL PoE+ Managed Ethernet Switch, w/16*10/100/1000Tx (30W/port) + 2*100/1000 SFP ports; 48~55V DC Power Input
