LMP-1002G-10G-SFP-24
10-Port Industrial PoE+ Light Layer 3 Managed Ethernet Switch, with 8*10/100/1000Tx (30W/Port) and 2*1G/10G SFP+ Slots; 12~55VDC Power Input
Product WarrantySee details >
0%
Introduction
Antaira Technologies’ LMP-1002G-10G-SFP-24 is a 10-port industrial gigabit managed Ethernet switch that is embedded with eight PoE+ gigabit Ethernet ports and two dual rates (1G/10G) SFP+ slots for fiber connection. This series is a fully manageable industrial Ethernet switch pre-loaded with standard Layer 2 network management software. It supports Jumbo Frame and wide bandwidth for data transmission and has sufficient port counts for edge-level connectivity solutions.
The LMP-1002G-10G-SFP-24 has a compact form factor design with an IP30 rating, DIN-rail mounting, and standard operating temperature support from -40°C to 60°C. It also provides high EFT and ESD protection for any industrial networking application within factory automation, ITS, power/utility, water wastewater, or any other outdoor or harsh environment. The two 10 gig SFP+ ports deliver high bandwidth support to applications requiring greater speeds of connectivity.
Features
- Supports 8*10/100/1000Tx IEEE 802.3at/af Compliant with 30W/Port
- Supports 2*1G/10G SFP+ Slots
- Network Redundancy: STP/RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
- Supports IPv4/IPv6, and DHCP Option 66/67/82
- Supports Modbus/TCP Protocol for Device Management and Monitoring
- IGMP v1/v2/v3 for Multicast Traffic Filtering
- IEEE802.1Q VLAN for Easy Network Planning
- Power Input: 12~55VDC in 6-Pin Terminal Block
- Reverse Polarity Protection
- IP30 Protection
- DIN-Rail or Wall Mountable
- Operating Temperature Range - STD: -40° to 60°C
- 5-Year Warranty
Package Content
- 1 – LMP-1002G-10G-SFP-24
- 1 – Quick Installation Guide
- 1 – Wall mounting bracket set with screws
- 1 – DC cable – 18 AWG & DC jack 5.5 x 2.1mm
- 1 – RJ45 dust cover set
- 1 – RJ45 to DB9 serial console cable
Related Resources
PoE, PoE+ and PoE++: Choosing the Right Industrial Ethernet Switch for You
PoE, PoE+ and PoE++: Choosing the Right Industrial Ethernet Switch for You
May 16, 2022
Persistent PoE Power for Uninterrupted Operation with Antaira Managed bt PoE Switches
Persistent PoE Power for Uninterrupted Operation with Antaira Managed bt PoE Switches
July 19, 2021
Connect for Industrial Transformation (Total Solution for Automation)
Connect for Industrial Transformation (Total Solution for Automation)
October 16, 2024
Facilitating 24/7 City Surveillance with High-Power PoE
Facilitating 24/7 City Surveillance with High-Power PoE
August 11, 2022
Simplifying Network for Onboard Surveillance and Bus Operation
Simplifying Network for Onboard Surveillance and Bus Operation
June 01, 2022
Technology
IEEE Standards
- IEEE 802.3 10Base-T Ethernet
- IEEE 802.3u 100Base-TX Fast Ethernet
- IEEE 802.3ab 1000Base-T
- IEEE 802.3z 1000Base-X Gigabit Fiber
- IEEE 802.3ae 10 Gigabit Ethernet
- IEEE 802.3af/at Power over Ethernet
- IEEE 802.3x Flow Control
- IEEE 802.1d STP (Spanning Tree Protocol)
- IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
- IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
- ITU-T G.8032 / Y.1344 ERPS v1/v2(Ethernet Ring Protection Switch)
- IEEE 802.1Q Virtual Local Area Network (VLAN)
- IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization
- IEEE 802.1X Network Authentication
- IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
- IEEE 802.3ad Link Aggregation (LACP)
Processing Type
Store and Forward
Protocol
IGMP v1/v2/v3, SNMP v1/v2c/v3, TFTP, SNTP, SMTP, RMON, HTTP, HTTPS, Telnet, Syslog, DHCP Option 66/67/82, SSH/SSL, Modbus/TCP, LLDP, IPv4/IPv6
Flow Control
IEEE 802.3x flow control, back pressure flow control
Software
Configuration
Http, Https, Telnet, SSH, CLI, TFTP, SNMP v3
VLAN Group
4095 groups
IGMP Group
1024 groups
Ethernet Redundancy
STP/RSTP/MSTP, port trunk with LACP, ERPS v1/v2 (<50ms)
Performance
MAC Table Size
16K
Jumbo Frame
9.6 Kbytes
Memory Buffer
8 Mbits
Transfer Rate
- 14,880pps for Ethernet Port
- 148,800pps for Fast Ethernet Port
- 1,488,000pps for Gigabit Ethernet Port
- 14,880,000pps for 10 Gigabit Ethernet Port
Switching Architecture
Back-Plane (Switching Fabric): 56Gbps
Ethernet Interface
Ethernet Port Count
8 ports
10/100/1000 BASE-T(X)
8 ports
PoE Port
8 ports (30W/port)
PoE Pin Assignment
V+, V+, V-, V-, for pin 1, 2, 3, 6 (End-span, Mode A)
Fiber Interface
Fiber Port Count
2 ports
1G/10G SFP+
2 ports
Wavelength
Refers to SFP module
Other Interface
LED Indicator
- System: Power 1, Power 2, Master, Ring, Status
- Ethernet ports: Speed/Link/Active
- PoE: On-connected to PD devices
- SFP: Link/Active
Mechanical Characteristics
Housing
Metal, IP30 protection
Mounting
DIN-Rail mount, Wall mount (Optional)
Dimensions (W × H × D)
54 × 142 × 99 mm
Weight
- Unit weight : 2.58 lbs
- Shipping weight : 3.24 lbs
Power Requirements
Power Connection
Removable 6-contact terminal block
Input Voltage
12V–55V DC, Redundant Input
Power Redundancy
Yes
Relay Output
24VDC, 1A resistive
System Power Consumption
15.5 Watts
Max. PoE Power Budget
90W@12VDC, 180W@24VDC, 240W@48-55VDC
Overload Current Protection
Present
Reverse Polarity Protection
Present
Environmental Limits
Operating Temperature
-40° to 60° C (-40° to 140° F)
Storage Temperature
-40° to 85° C (-40° to 185° F)
Ambient Relative Humidity
5% to 95% non-condensing
Regulatory Approvals
Certifications
FCC, CE
UL 61010-1 / UL 61010-2-201
✔
EMI
- FCC Part 15 Subpart B Class A
- CE EN 55032 Class A
- EN 61000-6-4 Class A
EMS
- CE EN 55035/EN 61000-6-2
- IEC61000-4-2 (ESD)
- IEC61000-4-3 (RS)
- IEC61000-4-4 (EFT)
- IEC61000-4-5 (Surge)
- IEC61000-4-6 (CS)
- IEC61000-4-8 (Magnetic Field)
Stability Testing
- Free Fall: IEC60068-2-32
- Shock: IEC60068-2-27
- Vibration: IEC60068-2-6
MTBF
341,855 hrs.
Green
RoHS Compliant
Warranty
5 years
Download
Datasheet
Models
-
- LMP-1002G-10G-SFP-24
- 10-Port Industrial PoE+ Light Layer 3 Managed Ethernet Switch, with 8*10/100/1000Tx (30W/Port) and 2*1G/10G SFP+ Slots; 12~55VDC Power Input
