Industrial IP30 Ethernet Extender, 1km 10/100mbps Ethernet PoE Extender (1 Pair)

Antaira Technologies’ LEP-301M-KITcontains both LEP-301M-TX and LEP-301M-RX. The former is an long reach transceiver with one PoE PD Ethernet port and one PoE Long Reach injector port, and the latter is an long reach receiver with one PoE Long Reach Extender port and one PoE PSE Ethernet port.

LEP-301M-KIT is greatly beyond 100 meters distance limitation of RJ45 cable. Up to 1km the data and power can be transmitted simultaneously over the UTP cable. This kit is fully compliant with IEEE 802.3, 802.3u, 802.3af/at standards. Operation status can be locally monitored through a set of diagnostic LEDs located in the front and rear panels.

  • Supports Standard IEEE 802.3af/at PoE output
  • Provide IEEE 802.3af/at for the remote PD (powered device)
  • Support MDI/MDI-X Auto-Crossover
  • Support Auto-Negotiation
  • Dual Power Input Design for either PoE (IEEE 802.3af/at),
  • PoE++ (60W), or DC power supply input (54~57V)
  • Support Auto & Manual mode configuration for the Ethernet port
  • Provide the 7-segment digital LED to display current
  • PoE output and diagnostic ID
  • IP30 Protection
  • DIN-Rail or Wall Mountable
  • Operating Temperature Range: 0° to 60°C
  • 5-Year Warranty
IEEE Standards IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3af/at PLUS Power over Ethernet
Processing Type Store and Forward
Protocol CSMA/CD
Flow Control IEEE 802.3x back pressure flow control
Ethernet Interface
Ethernet Port Count 2 Port
(LEP-301M-TX x1 + LEP-301M-RX x1)
10/100 BASE-T(X) LRP Port (Type):
1 x 10/100Mbps (RJ-45 /w long reach PoE)

TP Port (Type):
1 x 10/100Mbps (RJ-45 /w PoE)
PoE Port LEP-301M-TX:
1 x 60W PoE++ Input (Compatible with 802.3af/at)

1 x IEEE 802.3af/at Output
PoE Pin Assignment End-span/mode A, Mid-span/mode B and 4-pair mode
Other Interface
DIP Switch Auto speed/Link speed/PSE mode
LED Indicator Link/Act, Speed, Status, Warning, Error,
7-segment Digital Display
Transfer Rate 14,880pps for Ethernet Port
148,800pps for Fast Ethernet Port
Power Requirements
Power Connection Removable 2-contact terminal block
Input Voltage DC Power Input: 54 ~ 57V DC

PoE Input: IEEE 802.3af/at and 60W PoE++
Power Redundancy Yes
System Power Consumption 2.5W
Max. PoE Power Budget Max. 30 Watts
Environmental Limits
Operating Temperature 0° to 60° C (32° to 140° F)
Storage Temperature -20° to 60° C (-4° to 140° F)
Ambient Relative Humidity 5% to 90% non-condensing
Mechanical Characteristics
Housing Metal, IP30 protection
Mounting DIN-Rail mount, Wall mount
Dimensions (W × H × D) 60 x 120 x 32 mm (W x D x H)
Weight 0.29kgs
Regulatory Approvals
Certifications FCC, CE
EMI FCC Part 15 Subpart B Class A
EMS EN 55032: 2015 / AC:2016
CISPR 32: 2015 (Ed 2.0) / C1: 2016
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 55024: 2010 + A1: 2015
Green RoHS Compliant
Warranty 5 years
  • 1 - LEP-301M-TX
  • 1 - LEP-301M-RX
  • DIN-Rail Kit and Wall-Mount Kit
  • Quick Installation Guide
75W Single Output Industrial Din-Rail Power Supply, 48VDC Output
240W Single Output Industrial Din-rail, 48VDC Output
120W Single Output Industrial Din-Rail Power Supply, 48VDC Output
This website uses cookies to enhance your browsing experience.